Library › Hardware › Materials & stock ·

Coat-hanger wire Ø2.0 mm and paper-clip wire Ø1.0 mm

What diameter is coat hanger wire and paper clip wire? · Standard part · basis: Measured consumer wire: wire coat hanger Ø2.0 (1.9–2.3 by maker), No. 1 paper clip Ø1.0 (jumbo Ø1.2); drawn as straight stubs

Also called: coat hanger wire diameter, paper clip wire diameter, coat hanger wire gauge, 2mm wire rod, paper clip thickness mm

Long Earth Society build part. Frames, crank wire and guides for the no-budget can engine. Long Earth Society

Exact dimensions. True size, with no tolerance added.

sizes
2 in table

Notes

  • Wire coat-hanger wire is about Ø2.0 mm (1.9–2.3 depending on the hanger); the file is a straight Ø2.0 × 200 mm stub.
  • A No. 1 paper clip is Ø1.0 mm wire and a jumbo clip Ø1.2; the file is a straight Ø1.0 × 100 mm stub.
  • On the can engine I bend coat-hanger wire into the crank pins and con-rods (a Z bend) and use it as the 2 mm displacer rod.
  • The can-engine cap and the LTD top plates have a Ø2 bore drawn for this 2 mm rod (fit: run, see their Mating features).

Coat-hanger wire Ø2.0 mm and paper-clip wire Ø1.0 mm size chart

wiredia (mm)range (mm)file length (mm)
coat hanger2.01.9–2.3200
paper clip No. 11.0jumbo 1.2100

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

WikipediaCraft stickwebCC BY-SA 4.0 (text)
WikipediaBB gunwebCC BY-SA 4.0 (text)
WikipediaTable tenniswebCC BY-SA 4.0 (text)
Long Earth SocietyEngine builds (videos and write-ups)web, videoLES site

Free files

★ Free files 2 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
coat-hanger-wire-2mmsteel coat-hanger wire Ø2.0 (1.9–2.3), 200 mm stubSTEP · STL
paper-clip-wire-1mmpaper-clip wire Ø1.0 (No. 1) / Ø1.2 (jumbo), 100 mm stubSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=coat-hanger-and-paper-clip-wire

Coat-hanger wire Ø2.0 mm and paper-clip wire Ø1.0 mm, isometric render of a generated part
Render of coat-hanger-wire-2mm from the free STEP; not to scale.

You might also need

Questions

What diameter is coat hanger wire?

About 2.0 mm (1.9–2.3 depending on the hanger); a hole for it is drawn at Ø2.0 exact.

What diameter is paper clip wire?

1.0 mm for a standard No. 1 clip, 1.2 mm for a jumbo clip.

What can I use coat hanger wire for in a Stirling engine?

Crank pins, Z-bent con-rods and the 2 mm displacer rod that runs in the Ø2 bore of the can-engine cap.