Library › Hardware › Pistons, cylinders & rods ·
Hollow pistons Ø29 × 75 and Ø39 × 100
What hollow piston fits a 30 or 40 mm liner? · Hardware · basis: Beta free-piston layout (Sunpower RE-1000 / NASA): displacer = bore − 1.0 (0.5 mm radial gap, designed), length 2.5 × bore
Also called: free piston stirling displacer, displacer design free piston, free piston displacer size
Long Earth Society build part. The LES free-piston test bed: Ø40 core on flexures in a 2 in tri-clamp vessel. Long Earth Society
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- sizes
- 2 in table
Notes
- The displacer of the free-piston core: a hollow cylinder with a 1.2 mm wall and a 2 mm rounded top edge, Ø29 × 75 for the Ø30 bore or Ø39 × 100 for the Ø40 bore.
- The 0.5 mm radial gap to the liner is designed: it is a shuttle, not a seal.
- A Ø9 × 8 rod boss with a Ø5 bore (fit: slide) takes the Ø5 displacer rod. Its spring (flexure plus gas spring) is tuned so it leads the piston by about 60–90°.
Hollow pistons Ø29 × 75 and Ø39 × 100 size chart
| file | diameter | length | bore it runs in | radial gap | wall | rod bore |
|---|---|---|---|---|---|---|
| displacer-30x75 | 29 | 75 | 30 | 0.5 | 1.2 | 5 |
| displacer-40x100 | 39 | 100 | 40 | 0.5 | 1.2 | 5 |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| rod bores | Ø5 | Ø5 rod | slide | all |
| displacer in the liner | liner bore − 1.0 (0.5 radial) | cylinder liner bore | designed | displacer-* |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| NASA (NTRS, public domain) | Free-piston Stirling engine design and analysis (RE-1000 test results) (1984) | US Government work, public domain | |
| NASA (NTRS, public domain) | Dynamics of free-piston Stirling engines (1987) | US Government work, public domain | |
| Wikipedia | Free-piston engine | web | CC BY-SA 4.0 (text) |
| Wikipedia | Beale number | web | CC BY-SA 4.0 (text) |
| Ohio University | Stirling cycle machine analysis (Urieli), free online | web | Author's site |
| Long Earth Society | Engine builds | web, video | LES site |
Free files
★ Free files 2 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| displacer-30x75 | displacer Ø29 (0.5 mm radial gap in a Ø30 bore) × 75, hollow 1.2 wall, Ø5 rod boss | STEP · STL |
| displacer-40x100 | displacer Ø39 (0.5 mm radial gap in a Ø40 bore) × 100, hollow 1.2 wall, Ø5 rod boss | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=hollow-pistons-30-40

How it fits
Goes in or on
Connects to
Alternatives
You might also need
Questions
How does a free-piston Stirling keep its phase without a crank?
The displacer is a tuned mass on a spring (flexure and gas spring) that resonates ahead of the piston, typically 60–90°.
What gap does the free-piston displacer have?
0.5 mm radial: Ø29 in the Ø30 liner, Ø39 in the Ø40.
