Library › Hardware › Fasteners ·
Nyloc lock nuts, M2.5–M8 (DIN 985)
How thick is an M3 nyloc nut? · Hardware · basis: DIN 985 / ISO 10511 (thin type is lower; values are the common DIN 985)
Also called: nyloc nut, nylock, lock nut, din 985, m3 lock nut
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- sizes
- 6 in table
Notes
- Same across-flats as a plain nut, taller because of the nylon collar: M3 is 4.0 mm vs 2.4 mm plain. A nut pocket is the AF and the full height (see Mating features).
- Not reusable more than a few times; don't rely on them on a printed part that will be opened often.
Nyloc lock nuts, M2.5–M8 size chart
| thread | width af (mm) | height (mm) |
|---|---|---|
| M2.5 | 5.0 | 2.9 |
| M3 | 5.5 | 4.0 |
| M4 | 7.0 | 5.0 |
| M5 | 8.0 | 5.0 |
| M6 | 10.0 | 6.0 |
| M8 | 13.0 | 8.0 |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| hex | AF × h (M3 5.5 × 4.0) | nut pocket | press | nyloc-* |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| McMaster-Carr | Nylon-insert locknuts (free STEP/IGES/STL per part, for your own design use; no redistribution) | STEP, IGES, STL, PDF | McMaster-Carr site terms: personal design use, no redistribution verify |
| Wikipedia | Nyloc nut | web | CC BY-SA 4.0 (text) |
Free files
★ Free files 6 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| nyloc-m2.5 | DIN 985 M2.5, 5.0 AF × 2.9 high | STEP · STL |
| nyloc-m3 | DIN 985 M3, 5.5 AF × 4.0 high | STEP · STL |
| nyloc-m4 | DIN 985 M4, 7.0 AF × 5.0 high | STEP · STL |
| nyloc-m5 | DIN 985 M5, 8.0 AF × 5.0 high | STEP · STL |
| nyloc-m6 | DIN 985 M6, 10.0 AF × 6.0 high | STEP · STL |
| nyloc-m8 | DIN 985 M8, 13.0 AF × 8.0 high | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=nyloc-nuts-metric

Fits with




Questions
How tall is an M3 nyloc nut?
4.0 mm (5.5 mm across flats); an M4 is 5.0 mm (7 AF), M5 5.0 mm (8 AF), M6 6.0 mm (10 AF), M8 8.0 mm (13 AF).
Can I print a pocket for a nyloc nut?
Yes: the exact pocket is the nut's across-flats (5.5 mm for M3) and full height (4.0 mm); apply your process allowance to it. The nylon collar must face away from the screw entry.