Library › Mechanisms › Cams ·

Oblique (swash) disc reciprocating a rod parallel to the shaft

How does a swash plate make a rod reciprocate? · Hardware · basis: Xem Studio design following Brown No. 95 (1868)

Also called: swash plate, wobble plate, oblique disc cam, plato oscilante, Taumelscheibe

Exact dimensions. True size, with no tolerance added.

sizes
3 in table

Notes

  • Resize: multiply every length by one factor k and the motion stays identical: angles, ratios, timing and the formulas below do not change, because a mechanism's motion depends only on the ratios of its lengths. Here, scales with k: follower radius, stroke; stays the same: plate.
  • Resize: Scale base radius and lift together: the motion law and the pressure angle stay the same. Raising lift alone steepens the pressure angle and the follower can jam.
  • Resize: fit clearances stay in mm (a slide fit is the same gap at any size); keep every printed wall and pin at least two nozzle widths; mass grows with k³ but part strength only with k², so at k = 2 parts are about 8× heavier and 4× stronger: check pins and thin links when scaling up.
  • A disc fixed obliquely on a shaft: a rod parallel to the shaft, pressed against the disc's face, moves up and down once per turn — stroke 2 r tan θ at radius r (here 2 × 14 × tan 15° = 7.5 mm).
  • Catalog Ø40 × 15° swash plate and ball-ended follower; follower at 14 mm radius in a square guide, its Ø8 ball touching the face (centre 4.53 mm above the plate's hub centre).
  • Brown's No. 95 (oblique disc on an upright shaft giving reciprocating motion to a rod resting on it).
  • Parts (each has its own page): swash-plate, swash-follower-guide-sq8, linear-shafts-h6.
  • Brown's movement No. 95 (1868) shows it; this model is a Xem Studio design following his figure, every part at true size.

Oblique (swash) disc reciprocating a rod parallel to the shaft size chart

parametervalue
plateØ40, 15°
follower radius14 mm
stroke7.5 mm

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Henry T. Brown (1868, public domain)Five Hundred and Seven Mechanical Movements — scan on archive.orgwebPublisher's page; dimensions are facts
507movements.comBrown's movement No. 95: figure, his text and an animationwebPublisher's page; dimensions are facts

Free files

★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
swash-plate-rod-mechanism-assemblyAssembled mechanism, all parts placed at one pose (STEP keeps each part separate)STEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=swash-plate-rod-mechanism

Oblique (swash) disc reciprocating a rod parallel to the shaft, isometric render of a generated part
Render of swash-plate-rod-mechanism-assembly from the free STEP; not to scale.

Fits with

Questions

How does a swash plate make a rod reciprocate?

A disc fixed obliquely on a shaft: a rod parallel to the shaft, pressed against the disc's face, moves up and down once per turn — stroke 2 r tan θ at radius r (here 2 × 14 × tan 15° = 7.5 mm).