Library › Hardware › Bearings, rails & motion ·
Linear shafts Ø3 to Ø25 mm (h6), 100 to 1000 mm long
What size linear rod fits an LM8UU bearing? · Standard part · basis: ISO 286 h6 ground shafting at nominal diameter; lengths as sold
Also called: 8mm linear rod, linear shaft 12mm, smooth rod 3d printer, linear rail rod cad
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- sizes
- 10 in table
Notes
- Drawn at the nominal diameter (h6 is 0 to −0.009 mm on Ø8). LMxxUU linear bearings run on the shaft of the same number: LM8UU on Ø8.
Linear shafts Ø3 to Ø25 mm (h6), 100 to 1000 mm long size chart
| dia (mm) | tolerance | lengths (mm) |
|---|---|---|
| 3 | h6 | 100, 150, 200, 250, 300 |
| 4 | h6 | 100, 150, 200, 250, 300 |
| 5 | h6 | 100, 150, 200, 250, 300 |
| 6 | h6 | 100, 150, 200, 250, 300 |
| 8 | h6 | 100, 150, 200, 250, 300, 400 |
| 10 | h6 | 100, 150, 200, 250, 300, 400, 500 |
| 12 | h6 | 100, 150, 200, 250, 300, 400, 500, 600 |
| 16 | h6 | 100, 150, 200, 250, 300, 400, 500, 600, 800 |
| 20 | h6 | 100, 150, 200, 250, 300, 400, 500, 600, 800, 1000 |
| 25 | h6 | 100, 150, 200, 250, 300, 400, 500, 600, 800, 1000 |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| outside | Ø per file name (h6: 0 to −0.009 on Ø8) | linear bushing bore (THK LM: shaft f6/g6 normal clearance, h6 small gap; precision class h5) | run | shaft-* |
| ends | Ø per file name, length as sold | shaft support / rod clamp bore of the same nominal Ø (set by the support maker) | clamp | shaft-* |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| ISO | ISO 286-2 tolerance grade h6 | standard | ISO; dimensions are facts verify |
Free files
★ Free files 70 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| shaft-3x100 | Ø3 × 100 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-3x150 | Ø3 × 150 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-3x200 | Ø3 × 200 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-3x250 | Ø3 × 250 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-3x300 | Ø3 × 300 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-4x100 | Ø4 × 100 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-4x150 | Ø4 × 150 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-4x200 | Ø4 × 200 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-4x250 | Ø4 × 250 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-4x300 | Ø4 × 300 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-5x100 | Ø5 × 100 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-5x150 | Ø5 × 150 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-5x200 | Ø5 × 200 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-5x250 | Ø5 × 250 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-5x300 | Ø5 × 300 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-6x100 | Ø6 × 100 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-6x150 | Ø6 × 150 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-6x200 | Ø6 × 200 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-6x250 | Ø6 × 250 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-6x300 | Ø6 × 300 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-8x100 | Ø8 × 100 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-8x150 | Ø8 × 150 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-8x200 | Ø8 × 200 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-8x250 | Ø8 × 250 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-8x300 | Ø8 × 300 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-8x400 | Ø8 × 400 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-10x100 | Ø10 × 100 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-10x150 | Ø10 × 150 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-10x200 | Ø10 × 200 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-10x250 | Ø10 × 250 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-10x300 | Ø10 × 300 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-10x400 | Ø10 × 400 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-10x500 | Ø10 × 500 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-12x100 | Ø12 × 100 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-12x150 | Ø12 × 150 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-12x200 | Ø12 × 200 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-12x250 | Ø12 × 250 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-12x300 | Ø12 × 300 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-12x400 | Ø12 × 400 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-12x500 | Ø12 × 500 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-12x600 | Ø12 × 600 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-16x100 | Ø16 × 100 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-16x150 | Ø16 × 150 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-16x200 | Ø16 × 200 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-16x250 | Ø16 × 250 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-16x300 | Ø16 × 300 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-16x400 | Ø16 × 400 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-16x500 | Ø16 × 500 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-16x600 | Ø16 × 600 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-16x800 | Ø16 × 800 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-20x100 | Ø20 × 100 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-20x150 | Ø20 × 150 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-20x200 | Ø20 × 200 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-20x250 | Ø20 × 250 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-20x300 | Ø20 × 300 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-20x400 | Ø20 × 400 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-20x500 | Ø20 × 500 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-20x600 | Ø20 × 600 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-20x800 | Ø20 × 800 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-20x1000 | Ø20 × 1000 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-25x100 | Ø25 × 100 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-25x150 | Ø25 × 150 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-25x200 | Ø25 × 200 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-25x250 | Ø25 × 250 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-25x300 | Ø25 × 300 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-25x400 | Ø25 × 400 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-25x500 | Ø25 × 500 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-25x600 | Ø25 × 600 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-25x800 | Ø25 × 800 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
| shaft-25x1000 | Ø25 × 1000 linear shaft (h6 ground, drawn at nominal Ø), 0.5 × 45° chamfers | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=linear-shafts-h6

Fits with



















































Questions
LM8UU shaft?
Ø8 h6.