Library › Hardware › Frames & stands ·

Syringe cradles for 10, 20 and 60 mL barrels

What cradle holds a 10, 20 or 60 mL syringe? · Standard part · basis: Saddle drawn at the barrel OD of the plastic-syringes entries (10 mL Ø15.9, 20 mL Ø21.0, 60 mL Ø29.0); M3 clearance Ø3.4

Also called: syringe holder stl, 10ml syringe cradle, syringe mount stirling, syringe clamp dimensions

Long Earth Society build part. The printed parts for the LES can engine, sized to the cans, syringes, CDs and bearings in the library. Long Earth Society

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
3 in table

Notes

  • A 40 mm long block with a half-round saddle at the syringe barrel OD exactly (fit: socket): Ø15.9 for 10 mL, Ø21.0 for 20 mL, Ø29.0 for 60 mL.
  • The saddle axis lies on the block's top face, so the block is barrel OD + 14 wide and half the barrel OD + 4 tall.
  • Four Ø3.4 holes at x ±14 and y ±(OD/2 + 3.5) take M3 screws from the saddle face into the frame; at that spacing the screw heads clear the barrel.

Syringe cradles for 10, 20 and 60 mL barrels size chart

filebarrel ODlengthwidthheight
syringe-cradle-10ml15.94029.911.95
syringe-cradle-20ml21.04035.014.5
syringe-cradle-60ml29.04043.018.5

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
syringe cradleØ15.9 / Ø21.0 / Ø29.010 / 20 / 60 mL syringe barrelsocketsyringe-cradle-*
cradle screw holesØ3.4M3 screw clearancedesignedsyringe-cradle-*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

WikipediaStirling enginewebCC BY-SA 4.0 (text)
Long Earth SocietyCan engine buildvideo, webLES site
Long Earth SocietyEngine builds (videos and write-ups)web, videoLES site

Free files

★ Free files 3 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
syringe-cradle-10mlcradle for a 10ml syringe: 40 × 29.9 × 11.95, Ø15.9 half-trough for the barrel (exact), 4 × M3 clearance (Ø3.4) at 28 × 22.9 centres to the frameSTEP · STL
syringe-cradle-20mlcradle for a 20ml syringe: 40 × 35 × 14.5, Ø21.0 half-trough for the barrel (exact), 4 × M3 clearance (Ø3.4) at 28 × 28 centres to the frameSTEP · STL
syringe-cradle-60mlcradle for a 60ml syringe: 40 × 43 × 18.5, Ø29.0 half-trough for the barrel (exact), 4 × M3 clearance (Ø3.4) at 28 × 36 centres to the frameSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=syringe-cradle

Syringe cradles for 10, 20 and 60 mL barrels, isometric render of a generated part
Render of syringe-cradle-10ml from the free STEP; not to scale.

Questions

What diameter is a 10 mL syringe barrel?

Ø15.9 outside, 14.5 inside; syringe-cradle-10ml's saddle is Ø15.9.

How is the cradle fixed?

Four M3 screws through Ø3.4 holes, 28 mm apart along the barrel.