Library › Hardware › Materials & stock ·

Plastic syringes 1–60 mL as pistons and cylinders

What is the inside diameter of a 10 mL syringe? · Standard part · basis: Typical BD / Terumo Luer-slip barrel dimensions; ID is what sets the stroke volume (±0.3 mm between brands: measure yours)

Also called: 10ml syringe diameter, syringe barrel inside diameter, 60ml syringe dimensions, syringe piston stirling engine, glass syringe stirling, 20ml syringe od

Used in Long Earth Society builds. Syringe air-injection test

Exact dimensions. True size, with no tolerance added.

sizes
7 in table

Notes

  • Barrel ID (and OD): 1 mL 4.7 (6.5), 3 mL 8.6 (10.0), 5 mL 12.0 (13.6), 10 mL 14.5 (15.9), 20 mL 19.1 (21.0), 30 mL 21.7 (23.6), 60 mL 26.7 (29.0) mm. Stroke volume per mm: ID²×π/4, so a 10 mL moves 0.165 mL per mm.
  • As a Stirling power piston: pull the rubber plunger tip, use the bare plunger as a near-frictionless piston (0.1 mm clearance) or keep the tip for a sealed, higher-friction piston. Glass syringes are the premium version: 10 mL glass is Ø15.0 ID, nearly zero friction.
  • Polypropylene softens at 100 °C: the syringe is always the cold-side power cylinder, 50 mm or more from the flame. The Luer tip is a convenient 4.2 mm pressure port.
  • The files are the barrel as it sits in an engine, plunger removed: the tube from the closed end (z 0, 1 mm end wall) to the finger flange (z L to L + 2.5, the bore open right through it), and the Ø4 × 8 male Luer tip below the closed end with a Ø2 flow bore (drawn; the bore varies by brand). A 4 mm ID tube pushes 8 mm over the tip.

Plastic syringes 1–60 mL as pistons and cylinders size chart

syringebarrel id (mm)barrel od (mm)length (mm)ml per mm stroke
1ml4.76.5570.017
3ml8.610.0700.058
5ml12.013.6760.113
10ml14.515.9900.165
20ml19.121.01030.287
30ml21.723.61050.37
60ml26.729.01250.56

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

WikipediaSyringewebCC BY-SA 4.0 (text)
BDBD syringe specificationswebBD site verify
Long Earth SocietyEngine builds (videos and write-ups)web, videoLES site

Free files

★ Free files 7 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
syringe-1ml1ml Luer-slip syringe barrel (plunger removed): ID 4.7, OD 6.5, 57 mm to the 20.5 × 8 × 2.5 finger flange (bore open through it), closed end 1 thick, Luer tip Ø4 × 8 with a Ø2 flow boreSTEP · STL
syringe-3ml3ml Luer-slip syringe barrel (plunger removed): ID 8.6, OD 10.0, 70 mm to the 24 × 8 × 2.5 finger flange (bore open through it), closed end 1 thick, Luer tip Ø4 × 8 with a Ø2 flow boreSTEP · STL
syringe-5ml5ml Luer-slip syringe barrel (plunger removed): ID 12.0, OD 13.6, 76 mm to the 27.6 × 8 × 2.5 finger flange (bore open through it), closed end 1 thick, Luer tip Ø4 × 8 with a Ø2 flow boreSTEP · STL
syringe-10ml10ml Luer-slip syringe barrel (plunger removed): ID 14.5, OD 15.9, 90 mm to the 29.9 × 8 × 2.5 finger flange (bore open through it), closed end 1 thick, Luer tip Ø4 × 8 with a Ø2 flow boreSTEP · STL
syringe-20ml20ml Luer-slip syringe barrel (plunger removed): ID 19.1, OD 21.0, 103 mm to the 35 × 8 × 2.5 finger flange (bore open through it), closed end 1 thick, Luer tip Ø4 × 8 with a Ø2 flow boreSTEP · STL
syringe-30ml30ml Luer-slip syringe barrel (plunger removed): ID 21.7, OD 23.6, 105 mm to the 37.6 × 8 × 2.5 finger flange (bore open through it), closed end 1 thick, Luer tip Ø4 × 8 with a Ø2 flow boreSTEP · STL
syringe-60ml60ml Luer-slip syringe barrel (plunger removed): ID 26.7, OD 29.0, 125 mm to the 43 × 8 × 2.5 finger flange (bore open through it), closed end 1 thick, Luer tip Ø4 × 8 with a Ø2 flow boreSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=plastic-syringes

Plastic syringes 1–60 mL as pistons and cylinders, isometric render of a generated part
Render of syringe-10ml from the free STEP; not to scale.

You might also need

Questions

What is the inside diameter of a 10 mL syringe?

About 14.5 mm (OD 15.9); a 20 mL is 19.1 mm, a 60 mL 26.7 mm. Brands vary by ±0.3 mm.

How do I use a syringe as a Stirling engine piston?

Cut the barrel to length, keep it on the cold side, and run the plunger without its rubber tip for low friction (or with it for a seal). The 10 mL size matches a 12 oz can displacer well.

How much volume does a syringe move per mm?

ID² × π / 4: 10 mL (14.5 mm) → 0.165 mL/mm; 20 mL (19.1 mm) → 0.287 mL/mm; 60 mL (26.7 mm) → 0.56 mL/mm.