Library › Hardware › Frames & stands ·
Frame for two 10 mL syringes at 90°
What frame holds two syringes in a V at 90 degrees? · Hardware · basis: Computed in the generator: crank throw 8, rod 60, 10 mL barrel 15.9 OD / 14.5 ID; checked over a full turn
Also called: alpha stirling frame, v twin syringe stirling frame, two syringe stirling engine frame stl
Long Earth Society build part. The two-syringe alpha, complete. Long Earth Society
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- sizes
- 7 in table
Notes
- The one-piece frame of the two-syringe alpha: 140 × 52.45 × 128. A Ø24 boss holds the Ø5 crankshaft in two 625 bearings (Ø16 pockets at both ends, fit: press) with a Ø5.6 passage between.
- Two Ø15.9 barrel sockets (fit: socket) at ±45°, their axes meeting at the crank axis; the 90° between them is the alpha phase, with both con-rods on one crank pin.
- Socket inner faces at R45 from the crank axis: the piston skirt comes no closer than R43.4, so it never leaves the barrel. M3 pinch screws in Ø2.5 holes; foot with 2 × Ø5.5 at 50 mm for M5 into 2020.
Frame for two 10 mL syringes at 90° size chart
| parameter | value |
|---|---|
| outline | 140 × 52.45 × 128 |
| V angle | 90° |
| barrel sockets | 2 × Ø15.9 at ±45° |
| socket inner face | R45 |
| min skirt radius | 43.4 |
| bearing pockets | 2 × Ø16 (625) |
| foot | 2 × Ø5.5 at 50 |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| barrel sockets | Ø15.9 | 10 mL syringe barrel | socket | alpha-frame-* |
| bearing pockets | Ø16 | 625 bearing | press | alpha-frame-* |
| shaft passage between pockets | Ø5.6 | Ø5 shaft (no contact) | designed | alpha-frame-* |
| pinch-screw holes | Ø2.5 | M3 tap drill | designed | alpha-frame-* |
| foot holes | Ø5.5 | M5 clearance (ISO 273) | designed | alpha-frame-* |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Long Earth Society | Engine builds | web, video | LES site |
| Wikipedia | Stirling engine (alpha configuration) | web | CC BY-SA 4.0 (text) |
Free files
★ Free files 1 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| alpha-frame-10ml | alpha V-twin frame: Ø5 shaft in two 625s (pockets both ends of the Ø24 boss), two 10 mL barrel sockets at ±45° whose axes meet the crank axis, inner faces at R45, M3 pinch screws, foot with 2 × M5 at 50 mm for 2020 | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=v-syringe-frame-90

How it fits
Goes in or on
Connects to
Alternatives
Also needed
You might also need
Questions
How do I get 90° phase on a two-syringe alpha Stirling?
Put the barrels in a 90° V with both con-rods on one crank pin; the V angle is the phase. This frame holds them at ±45°.
Why do the barrel sockets start 45 mm from the crank?
At bottom dead centre the piston skirt is 43.4 mm from the axis, so with the socket face at R45 the piston stays inside the barrel.
