Library › Hardware › Fasteners ·
Threaded rod, metric M3 to M12 (DIN 976), 100 to 1000 mm
What is the pitch of M8 threaded rod? · Standard part · basis: DIN 976-1 / ISO 261 coarse pitch; drawn as the major-diameter envelope
Also called: m8 threaded rod, threaded rod pitch, m6 threaded rod cad
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- sizes
- 7 in table
Notes
- Threads are plain cylinders at the major diameter.
Threaded rod, metric M3 to M12 (DIN 976), 100 to 1000 mm size chart
| thread | pitch (mm) | lengths (mm) |
|---|---|---|
| M3 | 0.5 | 100, 200, 250, 300, 500, 1000 |
| M4 | 0.7 | 100, 200, 250, 300, 500, 1000 |
| M5 | 0.8 | 100, 200, 250, 300, 500, 1000 |
| M6 | 1.0 | 100, 200, 250, 300, 500, 1000 |
| M8 | 1.25 | 100, 200, 250, 300, 500, 1000 |
| M10 | 1.5 | 100, 200, 250, 300, 500, 1000 |
| M12 | 1.75 | 100, 200, 250, 300, 500, 1000 |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| rod (thread as plain cylinder) | Ø3, 4, 5, 6, 8, 10, 12 (thread major) | clearance hole ISO 273 close / medium / free: M3 Ø3.2 / 3.4 / 3.6; M4 4.3 / 4.5 / 4.8; M5 5.3 / 5.5 / 5.8; M6 6.4 / 6.6 / 7; M8 8.4 / 9 / 10; M10 10.5 / 11 / 12; M12 13 / 14 / 15 | designed | threaded-rod-* |
| rod (tapped hole) | same | tap drill: M3 Ø2.5; M4 3.3; M5 4.2; M6 5; M8 6.75; M10 8.5; M12 10.2 | designed | threaded-rod-* |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| DIN | DIN 976-1 Threaded rods | standard | DIN; dimensions are facts verify |
Free files
★ Free files 42 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| threaded-rod-m3x100 | M3 threaded rod × 100 (thread drawn as a plain Ø3 cylinder, pitch 0.5) | STEP · STL |
| threaded-rod-m3x200 | M3 threaded rod × 200 (thread drawn as a plain Ø3 cylinder, pitch 0.5) | STEP · STL |
| threaded-rod-m3x250 | M3 threaded rod × 250 (thread drawn as a plain Ø3 cylinder, pitch 0.5) | STEP · STL |
| threaded-rod-m3x300 | M3 threaded rod × 300 (thread drawn as a plain Ø3 cylinder, pitch 0.5) | STEP · STL |
| threaded-rod-m3x500 | M3 threaded rod × 500 (thread drawn as a plain Ø3 cylinder, pitch 0.5) | STEP · STL |
| threaded-rod-m3x1000 | M3 threaded rod × 1000 (thread drawn as a plain Ø3 cylinder, pitch 0.5) | STEP · STL |
| threaded-rod-m4x100 | M4 threaded rod × 100 (thread drawn as a plain Ø4 cylinder, pitch 0.7) | STEP · STL |
| threaded-rod-m4x200 | M4 threaded rod × 200 (thread drawn as a plain Ø4 cylinder, pitch 0.7) | STEP · STL |
| threaded-rod-m4x250 | M4 threaded rod × 250 (thread drawn as a plain Ø4 cylinder, pitch 0.7) | STEP · STL |
| threaded-rod-m4x300 | M4 threaded rod × 300 (thread drawn as a plain Ø4 cylinder, pitch 0.7) | STEP · STL |
| threaded-rod-m4x500 | M4 threaded rod × 500 (thread drawn as a plain Ø4 cylinder, pitch 0.7) | STEP · STL |
| threaded-rod-m4x1000 | M4 threaded rod × 1000 (thread drawn as a plain Ø4 cylinder, pitch 0.7) | STEP · STL |
| threaded-rod-m5x100 | M5 threaded rod × 100 (thread drawn as a plain Ø5 cylinder, pitch 0.8) | STEP · STL |
| threaded-rod-m5x200 | M5 threaded rod × 200 (thread drawn as a plain Ø5 cylinder, pitch 0.8) | STEP · STL |
| threaded-rod-m5x250 | M5 threaded rod × 250 (thread drawn as a plain Ø5 cylinder, pitch 0.8) | STEP · STL |
| threaded-rod-m5x300 | M5 threaded rod × 300 (thread drawn as a plain Ø5 cylinder, pitch 0.8) | STEP · STL |
| threaded-rod-m5x500 | M5 threaded rod × 500 (thread drawn as a plain Ø5 cylinder, pitch 0.8) | STEP · STL |
| threaded-rod-m5x1000 | M5 threaded rod × 1000 (thread drawn as a plain Ø5 cylinder, pitch 0.8) | STEP · STL |
| threaded-rod-m6x100 | M6 threaded rod × 100 (thread drawn as a plain Ø6 cylinder, pitch 1.0) | STEP · STL |
| threaded-rod-m6x200 | M6 threaded rod × 200 (thread drawn as a plain Ø6 cylinder, pitch 1.0) | STEP · STL |
| threaded-rod-m6x250 | M6 threaded rod × 250 (thread drawn as a plain Ø6 cylinder, pitch 1.0) | STEP · STL |
| threaded-rod-m6x300 | M6 threaded rod × 300 (thread drawn as a plain Ø6 cylinder, pitch 1.0) | STEP · STL |
| threaded-rod-m6x500 | M6 threaded rod × 500 (thread drawn as a plain Ø6 cylinder, pitch 1.0) | STEP · STL |
| threaded-rod-m6x1000 | M6 threaded rod × 1000 (thread drawn as a plain Ø6 cylinder, pitch 1.0) | STEP · STL |
| threaded-rod-m8x100 | M8 threaded rod × 100 (thread drawn as a plain Ø8 cylinder, pitch 1.25) | STEP · STL |
| threaded-rod-m8x200 | M8 threaded rod × 200 (thread drawn as a plain Ø8 cylinder, pitch 1.25) | STEP · STL |
| threaded-rod-m8x250 | M8 threaded rod × 250 (thread drawn as a plain Ø8 cylinder, pitch 1.25) | STEP · STL |
| threaded-rod-m8x300 | M8 threaded rod × 300 (thread drawn as a plain Ø8 cylinder, pitch 1.25) | STEP · STL |
| threaded-rod-m8x500 | M8 threaded rod × 500 (thread drawn as a plain Ø8 cylinder, pitch 1.25) | STEP · STL |
| threaded-rod-m8x1000 | M8 threaded rod × 1000 (thread drawn as a plain Ø8 cylinder, pitch 1.25) | STEP · STL |
| threaded-rod-m10x100 | M10 threaded rod × 100 (thread drawn as a plain Ø10 cylinder, pitch 1.5) | STEP · STL |
| threaded-rod-m10x200 | M10 threaded rod × 200 (thread drawn as a plain Ø10 cylinder, pitch 1.5) | STEP · STL |
| threaded-rod-m10x250 | M10 threaded rod × 250 (thread drawn as a plain Ø10 cylinder, pitch 1.5) | STEP · STL |
| threaded-rod-m10x300 | M10 threaded rod × 300 (thread drawn as a plain Ø10 cylinder, pitch 1.5) | STEP · STL |
| threaded-rod-m10x500 | M10 threaded rod × 500 (thread drawn as a plain Ø10 cylinder, pitch 1.5) | STEP · STL |
| threaded-rod-m10x1000 | M10 threaded rod × 1000 (thread drawn as a plain Ø10 cylinder, pitch 1.5) | STEP · STL |
| threaded-rod-m12x100 | M12 threaded rod × 100 (thread drawn as a plain Ø12 cylinder, pitch 1.75) | STEP · STL |
| threaded-rod-m12x200 | M12 threaded rod × 200 (thread drawn as a plain Ø12 cylinder, pitch 1.75) | STEP · STL |
| threaded-rod-m12x250 | M12 threaded rod × 250 (thread drawn as a plain Ø12 cylinder, pitch 1.75) | STEP · STL |
| threaded-rod-m12x300 | M12 threaded rod × 300 (thread drawn as a plain Ø12 cylinder, pitch 1.75) | STEP · STL |
| threaded-rod-m12x500 | M12 threaded rod × 500 (thread drawn as a plain Ø12 cylinder, pitch 1.75) | STEP · STL |
| threaded-rod-m12x1000 | M12 threaded rod × 1000 (thread drawn as a plain Ø12 cylinder, pitch 1.75) | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=threaded-rod-metric-din-976

Fits with




Questions
M8 pitch?
1.25 mm.