Library › Hardware › Heat transfer ·

Burner drum for one or three vertical 2 in tri-clamp tubes

What burner drum heats several 2 inch tubes with one torch? · Hardware · basis: Hole and tube positions from the engine layouts in tools/gen_ta_power.py; Ø66 holes pass over a 2 in ferrule (Ø64)

Also called: burner shroud three tubes, torch shroud vertical tube middle, propane burner drum thermoacoustic

Long Earth Society build part. The drums that put one torch's heat into my generators. Long Earth Society

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
2 in table

Notes

  • A closed drum split across its height: the lower half carries a Ø40 flue straight down to a torch standing on the bench (the hot gas rises up it), the upper half the vents. The tubes pass through Ø66 holes, so each half slides over a 2 in ferrule; the halves join with three M4 × 20 through their tabs.
  • Ring engine: one drum Ø256 round all three cores' hot zones, flue at the centre between them. Twin engine: a Ø130 drum with its flue in front of the core.
  • Inside height 40: room for the optional fin sleeves. The annulus round each tube at the holes is a designed gap (3.6 mm).
  • It runs at flame temperature; what it is made of is the builder's choice.

Burner drum for one or three vertical 2 in tri-clamp tubes size chart

filediameter (mm)flue (mm)
drum-ring-lower256.0480.1
drum-single-lower130.0403.7

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
tube holesØ662 in tube Ø50.8 (7.6 annulus, passes a Ø64 ferrule)designedall
tab holesØ4.5M4 clearance (ISO 273 medium)designedall
flueØ40 / Ø35torch flame (no contact)designeddrum-ring-lower*
flueØ40 / Ø35torch flame (no contact)designeddrum-single-lower*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Xem Studiotools/gen_ta_power.py: the network model and every dimension on this pagecodeCC BY 4.0
Long Earth SocietyEngine buildsweb, videoLES site

Free files

★ Free files 4 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
drum-ring-lowerring drum lower half: Ø256 × 22.5, walls 2.5, three Ø66 tube holes on r 80, Ø40 / Ø35 flue 480.1 down from the centre, 3 tabsSTEP · STL
drum-ring-upperring drum upper half: three Ø66 tube holes, 8 × Ø8 and Ø12 vents over the centre, 3 tabsSTEP · STL
drum-single-lowersingle drum lower half: Ø130 centred 22 in front of the tube, Ø66 tube hole, flue 403.7 down at y 64STEP · STL
drum-single-uppersingle drum upper half: tube hole, vents over the flueSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=tri-clamp-burner-drum

Burner drum for one or three vertical 2 in tri-clamp tubes, isometric render of a generated part
Render of drum-single-lower from the free STEP; not to scale.

Fits with

Questions

Why a flue down to the bench?

The hot zones are half way up the cores, above the pistons; the flue brings the flame there while the torch stands safely on the bench.