Library › Tri-clamp & pipe › Clamp fittings ·
Tri-clamp racking arm: 1½ in clamp body and ½ in arms, 2 to 6 in reach
What is a tri-clamp racking arm? · Hardware · basis: Xem Studio design: a 1½ in clamp body with a sealed bore for ½ in tube (two O-rings), and a bent arm that turns inside the vessel
Also called: tri clamp racking arm, 1.5 racking arm, rotating racking arm stl
Exact dimensions. True size, with no tolerance added.
- sizes
- 3 in table
Notes
- Turn the arm down to draw from the bottom, up to rack clear beer off the yeast. Fits a 1½ in side port on a fermenter.
- Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.
Tri-clamp racking arm: 1½ in clamp body and ½ in arms, 2 to 6 in reach size chart
| reach (in) | reach (mm) | tube od (mm) | o rings |
|---|---|---|---|
| 2 | 50.8 | 12.7 | AS568-012 × 2 |
| 4 | 101.6 | 12.7 | AS568-012 × 2 |
| 6 | 152.4 | 12.7 | AS568-012 × 2 |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| GW Kent | Tri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thickness | web | publisher's guide; dimensions cited |
| Rubber Fab | Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50) | maker chart; dimensions are facts verify |
Free files
★ Free files 4 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| racking-arm-body-1.5in | 1½ in clamp body: Ø24 boss 40 long, Ø12.8 bore with two AS568-012 O-ring grooves for ½ in tube | STEP · STL |
| racking-arm-tube-2in | ½ in (Ø12.7 × 1.6) arm: 60 straight through the body, 90° bend on R25, 2 in reach | STEP · STL |
| racking-arm-tube-4in | ½ in (Ø12.7 × 1.6) arm: 60 straight through the body, 90° bend on R25, 4 in reach | STEP · STL |
| racking-arm-tube-6in | ½ in (Ø12.7 × 1.6) arm: 60 straight through the body, 90° bend on R25, 6 in reach | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=tri-clamp-racking-arms

Fits with
Questions
What seals the arm?
Two AS568-012 O-rings in the body bore; the arm turns in them.


