Library › Tri-clamp & pipe › Clamp fittings ·

Sanitary clamp elbows, 90° and 45°: 6, 8, 10 and 12 in (tri-clamp style)

What are the dimensions of a 6, 8, 10 or 12 inch tri-clamp elbow? · Hardware · basis: Manufacturers' published clamp-fitting tables; ISO 2852 clamp face

Also called: 6 inch tri clamp elbow, 8 inch tri clamp elbow, 10 inch tri clamp elbow, 12 inch tri clamp elbow, codo tri clamp 6 pulgadas

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
4 in table

Notes

  • Centre to face (A) per Dixon B2CMP / B2KMP; Steel & O'Brien and VNE list the same radius and A within 0.13 in.
  • Files: true-size STEP + STL of each fitting (no printing allowance).
  • Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.

Sanitary clamp elbows, 90° and 45°: 6, 8, 10 and 12 in size chart

size (in)elbow 90 A (in)elbow 45 A (in)centreline R (in)
69.884.639.0
812.885.8512.0
1015.887.1315.0
1218.888.3818.0

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
clamp face6 in 166.9 / 156.5 / 152.4 × 2.77; 8 in 217.7 / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40mating ISO 2852 clamp face, Type B gasket in the groove, two clamp halves (flange C3 / groove C2 / tube OD × wall, mm)designedall

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Dixon SanitaryB2CMP / B2KMP clamp elbows (catalog page)PDFPublisher's catalog; dimensions are facts
VNEEG2C / EG2K clamp elbows, EG7 teewebPublisher's page; dimensions are facts
GW KentTri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thicknesswebpublisher's guide; dimensions cited
Rubber FabTri-clamp dimensions chart (ID, OD, bead per clamp size, ½ to 12 in and DIN 32676)PDFpublisher's chart; dimensions cited, nothing copied
Rubber FabTri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)PDFmaker chart; dimensions are facts verify

Free files

★ Free files 8 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
elbow-90-6in6 in 90° clamp elbow: 9.88 in centre to face, 9.0 in centreline radiusSTEP · STL
elbow-45-6in6 in 45° clamp elbow: 4.63 in centre to face, 9.0 in centreline radiusSTEP · STL
elbow-90-8in8 in 90° clamp elbow: 12.88 in centre to face, 12.0 in centreline radiusSTEP · STL
elbow-45-8in8 in 45° clamp elbow: 5.85 in centre to face, 12.0 in centreline radiusSTEP · STL
elbow-90-10in10 in 90° clamp elbow: 15.88 in centre to face, 15.0 in centreline radiusSTEP · STL
elbow-45-10in10 in 45° clamp elbow: 7.13 in centre to face, 15.0 in centreline radiusSTEP · STL
elbow-90-12in12 in 90° clamp elbow: 18.88 in centre to face, 18.0 in centreline radiusSTEP · STL
elbow-45-12in12 in 45° clamp elbow: 8.38 in centre to face, 18.0 in centreline radiusSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=sanitary-clamp-elbows-6-12in

Sanitary clamp elbows, 90° and 45°: 6, 8, 10 and 12 in (tri-clamp style), isometric render of a generated part
Render of elbow-90-10in from the free STEP; not to scale.

Fits with

Questions

What are the dimensions of a 6, 8, 10 or 12 inch tri-clamp elbow?

See the table: A is centre to face, B face to face.