Library › Tri-clamp & pipe › Clamp fittings ·

Sanitary clamp reducers, concentric and eccentric: 6 × 3, 6 × 4, 8 × 4 and 8 × 6 in (tri-clamp style)

How long is a 6 × 4 inch tri-clamp reducer? · Hardware · basis: Manufacturers' published clamp-fitting tables; ISO 2852 clamp face

Also called: 6x4 tri clamp reducer, 8x6 tri clamp reducer, 6x3 tri clamp reducer, reducción tri clamp 6 x 4

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
4 in table

Notes

  • Face-to-face per Dixon 31-14MP / 32-14MP (S&O and VNE list 6 × 3 and 6 × 4 within 0.13 in). No maker lists 10 × 8 or 12 × 10 with clamp ends.
  • Files: true-size STEP + STL of each fitting (no printing allowance).
  • Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.

Sanitary clamp reducers, concentric and eccentric: 6 × 3, 6 × 4, 8 ×… size chart

reducerface to face (in)
6 × 3 in6.88
6 × 4 in7.0
8 × 4 in7.5
8 × 6 in7.75

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
clamp face3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 / 156.5 / 152.4 × 2.77; 8 in 217.7 / 207.0 / 203.2 × 2.77mating ISO 2852 clamp face, Type B gasket in the groove, two clamp halves (flange C3 / groove C2 / tube OD × wall, mm)designedall

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Dixon SanitaryB31-14MP / B32-14MP clamp reducers (2023 catalog p. 692–693)PDFPublisher's catalog; dimensions are facts
Steel & O'BrienSanitary 2025 catalog (7MP tee and 9MP cross, p. 14–15)PDFPublisher's catalog; dimensions are facts
GW KentTri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thicknesswebpublisher's guide; dimensions cited
Rubber FabTri-clamp dimensions chart (ID, OD, bead per clamp size, ½ to 12 in and DIN 32676)PDFpublisher's chart; dimensions cited, nothing copied
Rubber FabTri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)PDFmaker chart; dimensions are facts verify

Free files

★ Free files 8 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
reducer-concentric-6x3in6 × 3 in concentric clamp reducer, 6.88 in face to faceSTEP · STL
reducer-eccentric-6x3in6 × 3 in eccentric clamp reducer, 6.88 in face to face, flat on one sideSTEP · STL
reducer-concentric-6x4in6 × 4 in concentric clamp reducer, 7.0 in face to faceSTEP · STL
reducer-eccentric-6x4in6 × 4 in eccentric clamp reducer, 7.0 in face to face, flat on one sideSTEP · STL
reducer-concentric-8x4in8 × 4 in concentric clamp reducer, 7.5 in face to faceSTEP · STL
reducer-eccentric-8x4in8 × 4 in eccentric clamp reducer, 7.5 in face to face, flat on one sideSTEP · STL
reducer-concentric-8x6in8 × 6 in concentric clamp reducer, 7.75 in face to faceSTEP · STL
reducer-eccentric-8x6in8 × 6 in eccentric clamp reducer, 7.75 in face to face, flat on one sideSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=sanitary-clamp-reducers-6-8in

Sanitary clamp reducers, concentric and eccentric: 6 × 3, 6 × 4, 8 × 4 and 8 × 6 in (tri-clamp style), isometric render of a generated part
Render of reducer-concentric-8x4in from the free STEP; not to scale.

Fits with

Questions

How long is a 6 × 4 inch tri-clamp reducer?

See the table: A is centre to face, B face to face.