Library › Tri-clamp & pipe › Clamp fittings ·
Sanitary clamp tees, 6 to 12 in, and the 6 in cross (tri-clamp style)
What are the dimensions of a 6 inch tri-clamp tee? · Hardware · basis: Manufacturers' published clamp-fitting tables; ISO 2852 clamp face
Also called: 6 inch tri clamp tee, 8 inch tri clamp tee, 6 inch tri clamp cross, te tri clamp 6 pulgadas
Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features
- sizes
- 5 in table
Notes
- 6 and 8 in from Steel & O'Brien 7MP (run = 2 × branch); 10 and 12 in branch from Dixon B7MP, run drawn at 2 × branch as every maker that lists both draws it. No maker lists a 8–12 in clamp cross.
- Files: true-size STEP + STL of each fitting (no printing allowance).
- Every clamp face is the ISO 2852 profile used across this site: 2.85 mm rim, flat face with the gasket groove (K 1.6 deep, R3 1.2 bottom, 23° walls, P2 0.8 edges) on C2, 20° back cone. Flange C3 / groove C2 / tube OD × wall, mm: ½–¾ in 25.0 / 20.4 (derived) / 12.7–19.05 × 1.65; 1–1½ in 50.5 / 43.5 / 25.4–38.1 × 1.65; 2 in 64.0 / 56.5 / 50.8 × 1.65; 2½ in 77.5 / 70.5 / 63.5 × 1.65; 3 in 91.0 / 83.5 / 76.2 × 1.65; 4 in 119.0 / 110.0 / 101.6 × 2.11; 6 in 166.9 (6.570 in) / 156.5 / 152.4 × 2.77; 8 in 217.7 (8.570 in) / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40.
Sanitary clamp tees, 6 to 12 in, and the 6 in cross size chart
| fitting | branch A (in) | run B (in) | source |
|---|---|---|---|
| tee 6 in | 6.375 | 12.75 | S&O |
| tee 8 in | 7.875 | 15.75 | S&O |
| tee 10 in | 9.38 | 18.76 | Dixon A; run 2 × A |
| tee 12 in | 10.88 | 21.76 | Dixon A; run 2 × A |
| cross 6 in | 6.375 | 12.75 | S&O |
Mating features
Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.
| feature | exact | mates with | fit | files |
|---|---|---|---|---|
| clamp face | 6 in 166.9 / 156.5 / 152.4 × 2.77; 8 in 217.7 / 207.0 / 203.2 × 2.77; 10 in 268.5 / 261.0 / 254.0 × 3.40; 12 in 319.3 / 311.8 / 304.8 × 3.40 | mating ISO 2852 clamp face, Type B gasket in the groove, two clamp halves (flange C3 / groove C2 / tube OD × wall, mm) | designed | all |
Where the files are
Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.
| Steel & O'Brien | Sanitary 2025 catalog (7MP tee and 9MP cross, p. 14–15) | Publisher's catalog; dimensions are facts | |
| Dixon Sanitary | B7MP clamp tees (catalog page) | Publisher's catalog; dimensions are facts | |
| GW Kent | Tri-clamp fittings guide: tube OD, flange OD and ID per size to 12 in; solid cap thickness | web | publisher's guide; dimensions cited |
| Rubber Fab | Tri-clamp dimensions chart (ID, OD, bead per clamp size, ½ to 12 in and DIN 32676) | publisher's chart; dimensions cited, nothing copied | |
| Rubber Fab | Tri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50) | maker chart; dimensions are facts verify |
Free files
★ Free files 5 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json
Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.
Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp- Claude: Add to Claude
- ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
- Cursor: install with one click. VS Code: install with one click.
| tee-6in | 6 in clamp tee: branch 6.375 in centre to face, run 12.75 in face to face (S&O) | STEP · STL |
| tee-8in | 8 in clamp tee: branch 7.875 in centre to face, run 15.75 in face to face (S&O) | STEP · STL |
| tee-10in | 10 in clamp tee: branch 9.38 in centre to face, run 18.76 in face to face (Dixon A; run 2 × A) | STEP · STL |
| tee-12in | 12 in clamp tee: branch 10.88 in centre to face, run 21.76 in face to face (Dixon A; run 2 × A) | STEP · STL |
| cross-6in | 6 in clamp cross: 6.375 in centre to face, 12.75 in face to face (S&O 9MP) | STEP · STL |
https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.Plain text: sheet.txt · JSON: /api/geometry?object=sanitary-clamp-tees-6-12in

Fits with
Questions
What are the dimensions of a 6 inch tri-clamp tee?
See the table: A is centre to face, B face to face.



