Library › Tri-clamp & pipe › Inserts & liners ·

Mesh cage for 1.5 and 2 in tri-clamp spools (Ø34.8 and Ø47.5)

What cage holds wire mesh inside a tri-clamp spool? · Hardware · basis: Split tube drawn at the tri-clamp spool bore (2 in Ø47.5, 1.5 in Ø34.8), 2 mm split so it closes for insertion

Also called: regenerator cage stl, stirling regenerator holder, tri clamp regenerator, 2 inch spool regenerator, regenerator sleeve

Long Earth Society build part. The regenerator packing and burner insulation on every LES engine. Long Earth Society

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
2 in table

Notes

  • The 2 in cage is Ø47.5 OD (= the 2 in spool bore) × 40 long, Ø44 ID, 1.75 mm wall.
  • The 1.5 in cage is Ø34.8 OD (= the 1.5 in spool bore) × 30 long, Ø32 ID, 1.4 mm wall.
  • Each has a 2 mm split through one wall (designed), so it closes slightly to slide into the bore and springs out against it.
  • The regenerator matrix fills the cage bore: Ø44 × 40 on the 2 in size, Ø32 × 30 on the 1.5 in.

Mesh cage for 1.5 and 2 in tri-clamp spools size chart

cageod (mm)id (mm)length (mm)split (mm)spool
regenerator-cage-47-5x4047.5444022 in
regenerator-cage-34-8x3034.8323021.5 in

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
cage ODØ47.5 / Ø34.8tri-clamp-spool bore 47.5 / 34.8socketregenerator-cage-*
cage split2closes for insertiondesignedregenerator-cage-*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

WikipediaMesh (scale)webCC BY-SA 4.0 (text)
WikipediaRegenerative heat exchangerwebCC BY-SA 4.0 (text)
WikipediaSteel woolwebCC BY-SA 4.0 (text)
McMaster-CarrWire cloth (free STEP per part, for your own design use; no redistribution)STEP, PDFMcMaster-Carr site terms verify
Long Earth SocietyEngine and rig buildsweb, videoLES site

Free files

★ Free files 2 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
regenerator-cage-47-5x40regenerator cage for a 2 in spool bore: Ø47.5 OD (= bore) × 40, Ø44 ID, 1.75 wall, 2 mm split; pack with mesh or scrubberSTEP · STL
regenerator-cage-34-8x30regenerator cage for a 1.5 in spool bore: Ø34.8 OD (= bore) × 30, Ø32 ID, 2 mm splitSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=tri-clamp-mesh-cage

Mesh cage for 1.5 and 2 in tri-clamp spools (Ø34.8 and Ø47.5), isometric render of a generated part
Render of regenerator-cage-47-5x40 from the free STEP; not to scale.

You might also need

Questions

What size regenerator cage for a 2 in tri-clamp spool?

Ø47.5 OD × 40 mm, Ø44 ID, drawn at the spool bore with a 2 mm split.

Why is the cage split?

The 2 mm split lets it close for insertion into the Ø47.5 or Ø34.8 bore; it is a designed gap.