Library › Hardware › Frames & stands ·

Shaft stands with a 625 bearing pocket, 40 and 60 mm axis height

What stand holds a 625 bearing at a set height? · Hardware · basis: Upright with a Ø16 × 5 pocket at the 625 OD; slotted foot for M3 at 42 mm

Also called: crank stand 625 bearing, stirling crankshaft support, 5mm shaft bearing stand, crank bearing upright

Long Earth Society build part. The connectors between rods, cranks and drives on the LES engines. Long Earth Society

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
2 in table

Notes

  • A 30 wide × 8 thick upright with a rounded top (R15) on a 50 × 24 × 3 foot. Shaft axis 40 or 60 mm above the foot's underside; overall 55 or 75 tall.
  • A Ø16 × 5 pocket (625 OD) on one face at the axis, and a Ø11.2 clearance hole through so the Ø5 shaft passes without contact.
  • Two slots 3.4 × 10 in the foot, 42 mm apart, for M3 into the gamma base plate slots. Two stands carry one shaft.

Shaft stands with a 625 bearing pocket, 40 and 60 mm axis height size chart

fileaxis heightoverall heightpocketclearance holefoot
crank-stand-625-h404055Ø16 × 5Ø11.250 × 24 × 3, slots 3.4 at 42
crank-stand-625-h606075Ø16 × 5Ø11.250 × 24 × 3, slots 3.4 at 42

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
crank-stand bearing pocketØ16625 bearingpresscrank-stand-*
crank-stand foot slots3.4 wideM3 screw clearancedesignedcrank-stand-*
crank-stand shaft clearanceØ11.2Ø5 shaft (no contact)designedcrank-stand-*

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

Long Earth SocietyTri-clamp Stirling engine buildsweb, videoLES site

Free files

★ Free files 2 parts. Xem Studio design: free to use, print and sell things from; not to be republished as files. Xem Studio Design License. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
crank-stand-625-h40crank stand, Ø5 shaft axis 40 mm up, Ø16 × 5 pocket for a 625 bearing, Ø11.2 shaft clearance, 50 × 24 × 3 foot with 2 × M3 slots 3.4 × 10 (along the shaft) on 42 mm centres across the shaft; two carry one crankshaft and seat on the gamma base plate's slotsSTEP · STL
crank-stand-625-h60crank stand, Ø5 shaft axis 60 mm up, Ø16 × 5 pocket for a 625 bearing, Ø11.2 shaft clearance, 50 × 24 × 3 foot with 2 × M3 slots 3.4 × 10 (along the shaft) on 42 mm centres across the shaft; two carry one crankshaft and seat on the gamma base plate's slotsSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=crank-stands-625

Shaft stands with a 625 bearing pocket, 40 and 60 mm axis height, isometric render of a generated part
Render of crank-stand-625-h60 from the free STEP; not to scale.

Questions

What bearing goes in the crank stand?

A 625 (5 × 16 × 5) in the Ø16 × 5 pocket.

How high is the crankshaft on the stands?

40 or 60 mm from the bottom of the foot to the shaft axis.