Library › Tri-clamp & pipe › Clamp fittings ·

Sanitary clamp spools: 3, 6 and 12 in, ½ to 4 in

How long are tri-clamp spools and what is their bore? · Standard part · basis: ASME BPE / 3-A clamp-fitting dimensions published identically by Dixon and Steel & O'Brien; ISO 2852 face profile

Also called: tri clamp spool, sanitary spool dimensions, tri clamp spool 6 inch, tri clamp spool stl

Used in Long Earth Society builds. 3-foot Stirling engine · Custom high-temperature thermoacoustic engine (final design) · Stirling engine displacer build (8" × 6"), aluminum flashing · Stirling engine displacer build (full walkthrough)

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
8 in table

Notes

  • A spool: BPE tube with an ISO 2852 face at each end, 76.2, 152.4 or 304.8 mm (3, 6, 12 in) face to face.
  • Bore 9.4 / 15.75 / 22.1 / 34.8 / 47.5 / 60.2 / 72.9 / 97.38 mm for ½ to 4 in (tube OD minus two 1.65 mm walls; 2.11 at 4 in).
  • Faces are the ISO 2852 profile: flat from the bore out to the flange OD with one gasket groove centred on the groove diameter (1.6 deep, bottom radius 1.2, walls 23°, edge radius 0.8, 4.01 wide at the face), 2.85 mm rim, 20° back cone, on the BPE flange diameters; the groove diameter is ISO 2852's C2 and the bead diameter of published gasket charts (4 in Ø110.0 from the chart); on ½ and ¾ in it is derived (Ø20.4, centred between the ¾ in bore and the flange OD).

Sanitary clamp spools: 3, 6 and 12 in, ½ to 4 in size chart

size (in)tube od (mm)bore (mm)flange od (mm)lengths (mm)
½12.79.425.076.2 / 152.4 / 304.8
¾19.0515.7525.076.2 / 152.4 / 304.8
125.422.150.576.2 / 152.4 / 304.8
1½38.134.850.576.2 / 152.4 / 304.8
250.847.564.076.2 / 152.4 / 304.8
2½63.560.277.576.2 / 152.4 / 304.8
376.272.991.076.2 / 152.4 / 304.8
4101.697.38119.076.2 / 152.4 / 304.8

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
clamp facesISO 2852 / BPE flangeclamp + Type B gasketclampall

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

ASMEBPE Bioprocessing Equipment (clamp fitting dimensions, tube OD and wall)standardASME; dimensions are facts verify
ISO (via iTeh sample)ISO 2852 clamp liners: face profile and flange / groove diametersPDFstandard excerpt; dimensions are facts
Dixon SanitaryClamp elbows, ferrules: dimension sheetPDFpublisher's catalogue; dimensions cited, nothing copied
Steel & O'BrienSanitary products catalog 2024 (clamp fittings dimension tables)PDFpublisher's catalogue; dimensions cited, nothing copied
Rubber FabTri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)PDFmaker chart; dimensions are facts verify

Free files

★ Free files 24 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
spool-0.5in-3in½ in spool, 3 in face to faceSTEP · STL
spool-0.5in-6in½ in spool, 6 in face to faceSTEP · STL
spool-0.5in-12in½ in spool, 12 in face to faceSTEP · STL
spool-0.75in-3in¾ in spool, 3 in face to faceSTEP · STL
spool-0.75in-6in¾ in spool, 6 in face to faceSTEP · STL
spool-0.75in-12in¾ in spool, 12 in face to faceSTEP · STL
spool-1in-3in1 in spool, 3 in face to faceSTEP · STL
spool-1in-6in1 in spool, 6 in face to faceSTEP · STL
spool-1in-12in1 in spool, 12 in face to faceSTEP · STL
spool-1.5in-3in1½ in spool, 3 in face to faceSTEP · STL
spool-1.5in-6in1½ in spool, 6 in face to faceSTEP · STL
spool-1.5in-12in1½ in spool, 12 in face to faceSTEP · STL
spool-2in-3in2 in spool, 3 in face to faceSTEP · STL
spool-2in-6in2 in spool, 6 in face to faceSTEP · STL
spool-2in-12in2 in spool, 12 in face to faceSTEP · STL
spool-2.5in-3in2½ in spool, 3 in face to faceSTEP · STL
spool-2.5in-6in2½ in spool, 6 in face to faceSTEP · STL
spool-2.5in-12in2½ in spool, 12 in face to faceSTEP · STL
spool-3in-3in3 in spool, 3 in face to faceSTEP · STL
spool-3in-6in3 in spool, 6 in face to faceSTEP · STL
spool-3in-12in3 in spool, 12 in face to faceSTEP · STL
spool-4in-3in4 in spool, 3 in face to faceSTEP · STL
spool-4in-6in4 in spool, 6 in face to faceSTEP · STL
spool-4in-12in4 in spool, 12 in face to faceSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=sanitary-clamp-spools

Sanitary clamp spools: 3, 6 and 12 in, ½ to 4 in, isometric render of a generated part
Render of spool-2in-6in from the free STEP; not to scale.

You might also need

Questions

What is the bore of a 2 inch tri-clamp spool?

47.5 mm (50.8 OD, 1.65 wall); 34.8 at 1½ in, 72.9 at 3 in.

What lengths are the spools?

3, 6 and 12 in face to face: 76.2, 152.4 and 304.8 mm.