Library › Tri-clamp & pipe › Clamp fittings ·

Sanitary clamp elbows, 90° and 45°, ½ to 4 in (tri-clamp style, BPE)

What is the centre-to-face dimension of a 2 inch sanitary clamp elbow? · Standard part · basis: ASME BPE / 3-A clamp-fitting dimensions published identically by two manufacturers; ISO 2852 face profile; drawn by Xem Studio from those numbers

Also called: tri clamp elbow dimensions, sanitary 90 elbow 2 inch, 2cmp elbow, 45 degree tri clamp elbow, tri clamp elbow stl, sanitary elbow step file

Used in Long Earth Society builds. S-type layout: does cold need to sit above hot?

Exact dimensions. Every file is drawn at true size with no tolerance added. The holes and pins that meet another part are listed below under Mating features, with the fit each joint needs; open those by your process's clearance before making the part. Mating features

sizes
8 in table

Notes

  • Clamp × clamp elbows: 90° (2CMP) and 45° (2KMP), both on the same centreline radius per size; a short straight sits between each face and the bend (0.5 in, 4 in: 0.625 in).
  • Centre to face is measured from the intersection of the two leg centrelines to the face; that is the number to lay out a run with.
  • ISO 2852 face: flat from the bore to the flange OD, gasket groove on C2 1.6 deep, bottom radius 1.2, walls 23°, edge radius 0.8; 2.85 mm rim, 20° back cone, on the BPE flange diameters ½–¾ in 25.0, 1–1½ in 50.5, 2 in 64.0, 2½ in 77.5, 3 in 91.0, 4 in 119.0 mm; tube OD 12.7 / 19.05 / 25.4 / 38.1 / 50.8 / 63.5 / 76.2 / 101.6 mm, wall 1.65 mm (4 in: 2.11). The gasket-groove diameter on ½ and ¾ in is derived (Ø20.4, centred between the ¾ in bore and the 25.0 flange so the groove fits); 4 in is Ø110.0 from the published gasket chart; the rest is from the standard. Type B gaskets: 1.7 web out to flange − 1, a bulge on each side on the groove diameter (5.5 overall), lip 1.1 inside the bore and 2.8 long; with the faces 1.7 apart each bulge is squeezed 0.3 into its groove (designed).

Sanitary clamp elbows, 90° and 45°, ½ to 4 in size chart

size (in)tube od (mm)flange (mm)c to f 90 (mm)c to f 45 (mm)radius (mm)
½12.725.041.324.528.6
¾19.0525.041.324.528.6
125.450.550.828.638.1
1½38.150.569.836.557.1
250.864.088.944.476.2
2½63.577.5107.952.495.2
376.291.0127.060.3114.3
4101.6119.0168.379.4152.4

Mating features

Drawn at the exact size. Open press, slide, run and socket features by your process's clearance (tolerances by process); leave designed gaps and clamp fits as drawn.

featureexactmates withfitfiles
clamp facesISO 2852 / BPE flangeclamp + Type B gasket to any fitting of the same sizeclampall

Where the files are

Other publishers' files are linked, not hosted. "verify" = check the license at the link before commercial use.

ASMEBPE Bioprocessing Equipment (clamp fitting dimensions, tube OD and wall)standardASME; dimensions are facts verify
ISO (via iTeh sample)ISO 2852 clamp liners: face profile and flange / groove diametersPDFstandard excerpt; dimensions are facts
Dixon SanitaryClamp elbows, ferrules: dimension sheetPDFpublisher's catalogue; dimensions cited, nothing copied
Steel & O'BrienSanitary products catalog 2024 (clamp fittings dimension tables)PDFpublisher's catalogue; dimensions cited, nothing copied
Rubber FabTri-Clamp gasket dimensional chart: gasket ID, OD and bead diameter per size (2 in bead 2.22 in / 56.50 mm, 1.5 in 1.71 / 43.50, 3 in 3.29 / 83.50)PDFmaker chart; dimensions are facts verify

Free files

★ Free files 16 parts. Generated by Xem Studio from the standard; threads are plain cylinders at major diameter. CC BY 4.0. index.json

Use this part in your AI. Your AI gets the exact sizes and files straight from Xem and can design a mount, case or adapter around it. Direct downloads here are limited to one file every 10 minutes; through your AI they are unlimited.

Connect Xem to your AI (free, no account, about a minute)
https://xemstudio.com/mcp
  1. Claude: Add to Claude
  2. ChatGPT (Plus or higher): open Connectors → Advanced → turn on Developer mode → Create → paste the address, no authentication → Create.
  3. Cursor: install with one click. VS Code: install with one click.
Other apps and full steps
elbow-90-0.5in½ in 90° clamp × clamp elbow (2CMP): 1.625 in centre to face, R 1.125 inSTEP · STL
elbow-45-0.5in½ in 45° clamp × clamp elbow (2KMP): 0.966 in centre to face, R 1.125 inSTEP · STL
elbow-90-0.75in¾ in 90° clamp × clamp elbow (2CMP): 1.625 in centre to face, R 1.125 inSTEP · STL
elbow-45-0.75in¾ in 45° clamp × clamp elbow (2KMP): 0.966 in centre to face, R 1.125 inSTEP · STL
elbow-90-1in1 in 90° clamp × clamp elbow (2CMP): 2.0 in centre to face, R 1.5 inSTEP · STL
elbow-45-1in1 in 45° clamp × clamp elbow (2KMP): 1.125 in centre to face, R 1.5 inSTEP · STL
elbow-90-1.5in1½ in 90° clamp × clamp elbow (2CMP): 2.75 in centre to face, R 2.25 inSTEP · STL
elbow-45-1.5in1½ in 45° clamp × clamp elbow (2KMP): 1.437 in centre to face, R 2.25 inSTEP · STL
elbow-90-2in2 in 90° clamp × clamp elbow (2CMP): 3.5 in centre to face, R 3.0 inSTEP · STL
elbow-45-2in2 in 45° clamp × clamp elbow (2KMP): 1.75 in centre to face, R 3.0 inSTEP · STL
elbow-90-2.5in2½ in 90° clamp × clamp elbow (2CMP): 4.25 in centre to face, R 3.75 inSTEP · STL
elbow-45-2.5in2½ in 45° clamp × clamp elbow (2KMP): 2.063 in centre to face, R 3.75 inSTEP · STL
elbow-90-3in3 in 90° clamp × clamp elbow (2CMP): 5.0 in centre to face, R 4.5 inSTEP · STL
elbow-45-3in3 in 45° clamp × clamp elbow (2KMP): 2.375 in centre to face, R 4.5 inSTEP · STL
elbow-90-4in4 in 90° clamp × clamp elbow (2CMP): 6.625 in centre to face, R 6.0 inSTEP · STL
elbow-45-4in4 in 45° clamp × clamp elbow (2KMP): 3.125 in centre to face, R 6.0 inSTEP · STL
Let your AI pull this. Add https://xemstudio.com/mcp to Claude, ChatGPT, Cursor or any MCP client (free, no account, one minute) and it can look up exact sizes, mating fits and free STEP/STL from every chat.
Set it up →

Plain text: sheet.txt · JSON: /api/geometry?object=sanitary-clamp-elbows

Sanitary clamp elbows, 90° and 45°, ½ to 4 in (tri-clamp style, BPE), isometric render of a generated part
Render of elbow-90-2in from the free STEP; not to scale.

You might also need

Questions

What is the centre-to-face of a 2 in sanitary 90° clamp elbow?

3.50 in (88.9 mm), on a 3.0 in (76.2 mm) centreline radius; the 45° is 1.75 in (44.5 mm).

Are ½ and ¾ in clamp elbows the same size?

Yes: both use the 25.0 mm mini flange and a 1.625 in centre to face (90°).

Do these mate with real sanitary fittings?

Yes: the faces are the ISO 2852 / BPE profile, so a standard clamp and gasket join them to any clamp fitting of the same size.